HARDWOOD PLANKS

EUROPEAN OAK - TYPE 3

EUROPEISK EK - TYP 3 - trägolv - ädelträtiljor

THICKNESS
21 mm (16mm can be special ordered in all widths up to 140mm)

WIDTHS 
68/75/ 95/115/140/180 mm

LENGTHS
600-2400 mm (standard)

 

 

 

 

 

 

 

 

GRADE
Type 3. The grade is allowed to include up to 5% of a better or poorer grade.

 APPEARANCE              
KNOTS no limitation in size or number, but no loose knots allowed.KNOTHOLESless than approx. 10mm wide and 2–3 mm deep are allowed.
SAPWOOD side strips of max 20% of plank width.
SURFACE CHECKS allowed.
PLANER BITES  allowed to a limited extent. 
COLOUR SHADING  yes, the natural colour variations of the wood, as well as discolourations and core zones up to approx. 30cm in length. 
INSECT DAMAGE  yes, isolated. 
FILLER  is allowed

 

PRODUCTINFORMATION

PDF ENGLISH aedeltrae english
DOWNLOAD PDF
 

SURFACE FINISHES

 

 1175 THUMBNAIL  1180 THUMBNAIL  1185 THUMBNAIL  1207 THUMBNAIL bild 1  1399 1184 THUMBNAIL  1401 THUMBNAIL  1402 THUMBNAIL  1775 THUMBNAIL
 1075  1180  1185  1207  1399 (1184)  1401  1402  1775

 

 1404 1182 THUMBNAIL  1405 1183 THUMBNAIL  1408 1179 THUMBNAIL  1409 THUMBNAIL  1414 1178 THUMBNAIL  1415 1177 THUMBNAIL  1416 1176 THUMBNAIL  1525 THUMBNAIL
 1404 (1182)  1405 (1183)  1408 (1179)  1409  1414 (1178)  1415 (1177)  1416 (1176)  1525

 

 1541 THUMBNAIL  1569 THUMBNAIL  1717 THUMBNAIL  Borstadyta THUMBNAIL  hardvaxolja THUMBNAIL  skarpkant THUMBNAIL  Sawcut THUMBNAIL  old age THUMBNAIL
 1541  1569  1717  Borstad yta  Hårdvaxolja  Skarp kant  Sawcut  Old Age

 

 

SUGGESTION FOR INSTRUCTIONAL TEXT WOOD FLOORS

WOOD FLOORS
Type:
Almedals Hardwood Planks, European Oak, TYPE 1. 
Dimensions: thickness 16 / 21 mm. width / widths: 68 / 75 / 95 / 115 / 140 / 180 mm 
(Specify lengths if specific lengths are required. Otherwise, standard lengths will be supplied, 600–2400mm.)

SURFACE FINISH
Almedals factory surface finish: (Specify the name and number provided under SURFACE FINISHES)
Alternatively: finished on-site with...

INSTALLATION
Specify one of the installation methods below.

Alt.1
The floor will be fully glued to the substrate using parquet adhesive of the MS type. EcoSimp eco-labelled (Nordic Swan) parquet adhesive is one alternative. Requirements concerning the substrate and quantity required according to the adhesive supplier's instructions.

Alt.2
The floor will be screwed to underlying wood material using the floor screws recommended by the floor supplier. Installation according to the floor supplier's instructions.